Electrical Requirements
Electrical Requirements
The server uses AC power. The server can operate effectively over a range of voltages and
frequencies.
The following table contains the power supply specifications for Oracle Server X8-8.
Note -
power numbers for the power supply used in the system. The numbers are not a rating of the
actual power consumption of the system. For up-to-date information about power consumption,
go to the Oracle Power Calculators web site
power-calculators/, and click the Oracle Server X8-8 link.
Parameter
Voltage (nominal)
Input current (maximum)
Frequency (nominal)
Maximum power
consumption
Maximum heat output
Caution -
input voltage levels or in input power frequency ranges are exceeded. Electrical disturbances,
such as the following, might damage the system:
Fluctuations caused by brownouts
■
Wide and rapid variations in input voltage levels or in input power frequency
■
Electrical storms
■
Faults in the distribution system, such as defective wiring
■
To protect your server from such disturbances, use a dedicated power distribution system,
power-conditioning equipment, and lightning arresters or power cables for protection from
electrical storms.
See the following additional power specifications.
18
Oracle Server X8-8 Installation Guide • June 2019
The power dissipation numbers listed in the following table are the maximum rated
Specification
200-240 VAC
■ 23 A @ 200 to 240 VAC
■ 12 A max per cord
50/60 Hz
■ Single 4-socket –1980 W
■ Dual 4-socket – 3950 W
■ Single 8-socket – 3880 W
13,475 BTU/Hr
Servers must have a reliable power source. Damage to the server might occur if the
https://www.oracle.com/it-infrastructure/