Using Oracle Integrated Lights Out Manager (Ilom); Connecting To Oracle Ilom - Oracle X8-8 Installation Manual

Using Oracle Integrated Lights Out Manager
(ILOM)
Oracle Server X8-8 is shipped with the latest version of Oracle Integrated Lights Out Manager
(ILOM). Oracle ILOM is system management firmware embedded on the service processor
(SP). The SP provides extensive management and monitoring capabilities for the server.
This section describes how to access and get started using Oracle ILOM for your server.
"Oracle ILOM Hardware and Interfaces" on page 74
■
"Accessing Oracle ILOM" on page 74
■
"Modifying Network Settings" on page 78
■
"Redirecting the Host Console Using Oracle ILOM" on page 82
■
"Troubleshooting Oracle ILOM" on page 86
■
For information about Oracle ILOM features, refer to the Oracle Integrated Lights Out Manager
(ILOM) 4.0 Documentation Library at https://www.oracle.com/goto/ilom/docs.

Connecting to Oracle ILOM

You can connect to Oracle ILOM using one of these methods:
Serial connection to SER MGT port (CLI only) - For information, see
■
ILOM Using a Local Serial Connection" on page
Dedicated remote network management connection - For information, see
■
Oracle ILOM Using a Remote Ethernet Connection" on page
Sideband network management connection - For information, refer to "Sideband
■
Network Management Connection" in Oracle ILOM Administrator's Guide for
Configuration and Maintenance, Firmware Release 4.0.x at
goto/ilom/docs.
75.
76.
https://www.oracle.com/

Using Oracle Integrated Lights Out Manager (ILOM)

"Log In to Oracle
"Log In to
73