Back Panel Connectors And Ports - Oracle X8-8 Installation Manual

Back Panel Connectors and Ports

■
■
NET Ethernet ports: The Ethernet ports, labeled NET0, NET1, NET2, and NET3, connect
■
the server to the network. The server Ethernet interfaces operate at 100 Mbit/sec, 1000
Mbit/sec, and 10,000 Mbit/sec.
See
USB Ports: USB ports support hot-plugging. You can connect and disconnect USB cables
■
and peripheral devices while the server is running without affecting server operations.
See
AC power cables: The server includes four power supply connectors, one for each power
■
supply.
See
Back Panel Connectors and Ports
The following figure shows the locations of cable connectors and ports on the back of Oracle
Server X8-8 and the cables and devices that you connect to them.
58 Oracle Server X8-8 Installation Guide • June 2019
The SER MGT port uses an RJ-45 cable and is always available. This port is the default
connection to the Oracle ILOM SP.
See "SER MGT Ports" on page
The network management port (NET MGT) port is the optional connection to the Oracle
ILOM SP. The SP network management port uses an RJ-45 cable for a 10/100 BASE-T
connection.
See "NET MGT Ports" on page
"Ethernet Ports" on page
"USB Ports" on page 60.
"Connect Cables and Power Cords" on page
60.
61.
62.
64.