Step 5 - Applying The Drill Jig For Proper Drilling - Assa Abloy Corbin Russwin FE6700 Series Installation Instructions Manual

Drill Guide clamping screw Drill Guide
ASSA ABLOY, the global leader in door opening solutions
Deadbolt
Lever
Drill Guide
Positioning
Holes
Positioning
Pins
Drill Guide
Hole
7
Step 5 – Applying the drill jig
for proper drilling
· Manually project the deadbolt by
applying force to the deadbolt lever
toward the bottom of the shutter.
· The deadbolt lever is now in a position
to allow the Drill Guide to be
positioned above the deadbolt and fixed
into position using the two drill guide
positioning holes provided in both sides
of the deadbolt case.
· The Drill Guide is an alligator type jig.
Loosen the Drill Guides clamping
screw, allowing the jaws to rotate 90
degrees to allow the guide to be
positioned above the deadbolt and
closed around the shutter so that the
pins on both sides of the Drill Guide
engage the two Drill Guide Positioning
Holes.
· Once the Drill Guide is engaged in the
positioning holes, tighten the Drill
Guides clamping screw so that it will
firmly secure the jig around the shutter.
· Using the Drill Guide Hole, drill a 1/8"
hole (drill provided with Jig
Components) thru both sets of rods.