Settings; Language Settings; Device Name - Masterflex Ismatec Reglo 78018-10 Operating Manual

Section 2: Basic Setup & Settings

SETTINGS

The Settings screen allows access to basic configuration settings. The Settings screen is accessed by tapping
SETTINGS
Settings Menu

Language Settings

The REGLO Digital Pump Drive can display English, French, German, Italian, and Spanish languages. The
default display language is English.
To change the display language:
1. Tap SETTINGS
2. Tap LANGUAGE.
3. Select the desired language from the available list.
4. Tap CONFIRM

Device Name

Individual names can be assigned to each REGLO Digital Pump Drive to make identification easier when
using more than one pump.
To assign a pump drive name:
1. Tap SETTINGS
2. Tap DEVICE NAME. The Device Name screen will be displayed.
3. Enter the desired pump name using the onscreen keypad (up to 8 characters).
4. Tap CONFIRM
3-10 Masterflex REGLO Digital Pump Drive with Advanced Connectivity
from any of the mode screens.
from any of the mode screens. The Settings screen will be displayed.
to save the new language selection.
from any of the mode screens. The Settings screen will be displayed.
to save or CANCEL
to discard changes.
Confirm
Connectivity Status
The icon will change to green
when the pump is connected
to MasterflexLive™
Scroll
Masterflex