Setting The Time; Setting The Date; Wi-Fi - Masterflex Ismatec Reglo 78018-10 Operating Manual

Section 2: Basic Setup & Settings

Setting the Time

To change the time:
1. Tap SETTINGS
2. Tap TIME.
3. Select either 12-HOUR or 24-HOUR time.
4. Tap HH to select hours and enter the desired time using the onscreen keypad.
5. Tap MM to select minutes and enter the desired time using the onscreen keypad.
6. If using 12-HOUR time, tap AM/PM to select either AM or PM.
7. Tap CONFIRM

Setting the Date

To change the date:
1. Tap SETTINGS
2. Tap DATE.
3. Select the desired date format (either month/day/year or day/month/year).
4. Tap the desired MONTH, DAY or YEAR field to select and then enter the date using the onscreen keypad.
5. Tap CONFIRM

WI-FI

The REGLO can connect to a network using Wi-Fi and Ethernet connections.
NOTE:
• The Ethernet connection will take priority if both Wi-Fi and Ethernet are used simultaneously.
• The REGLO supports WEP, WPA, WPA2, and None (open) Wi-Fi security protocols.
To select a Wi-Fi network:
1. Tap SETTINGS
2. Tap WIFI SETTINGS. The Wi-Fi Settings screen will be displayed.
3. If required, tap the WIFI toggle to select either ON or OFF.
4. Tap the desired Wi-Fi network from the available list.
5. If required, enter the network PASSWORD using the onscreen keypad.
6. Tap CONNECT to join the network or CANCEL to cancel.
7. Tap CONFIRM
3-11 Masterflex REGLO Digital Pump Drive with Advanced Connectivity
from any of the mode screens. The Settings screen will be displayed.
to save or CANCEL
from any of the mode screens. The Settings screen will be displayed.
to save or CANCEL
from any of the mode screens. The Settings screen will be displayed.
to return to the Settings screen.
to discard changes.
to discard changes.
Masterflex