Connect Coolant To Instrument (General); Connecting The Coolant Container And Hose Set - KaVo ESTETICA E70 Vision Instructions For Use Manual

Instructions for use ESTETICA E70 Vision / E80 Vision
4 Operation | 4.16 Use pump for physiological saline solution (optional accessory)

4.16.3 Connect coolant to instrument (general)

▶ Route the coolant hose ③ from the unit along the motor lead (clips) and
connect it to the straight or contra-angle handpiece ⑤. Insert the hose into
the retention ring ④.
See also:
2 Instructions for use of the respective instrument

4.16.4 Connecting the coolant container and hose set

Running, open hose pump.
Risk of injury.
▶ Turn off the device before opening the hose pump.
Danger of tipping due to the coolant containers being too heavy.
Malfunctions.
▶ Use coolant containers with a maximal volume of 1 litre only.
▶ Check the stability.
Note
The coolant must be selected to suit the planned application. The flow rate of
the coolant is dependent on the instrument used. The user must set an ad-
equate flow of coolant and check this.
Note
The hose set sterile S 600 (10 pcs.) (Mat. no. 1.009.8757) must be
changed after each application.
Note
Check the integrity of the hose set before use. If product or packaging are
damaged, the product needs to be discarded.
CAUTION
CAUTION
136 / 178