Using The Surgical Motor With "Free Application" Activity - KaVo ESTETICA E70 Vision Instructions For Use Manual

Instructions for use ESTETICA E70 Vision / E80 Vision
4 Operation | 4.15 Using the SL600 surgical motor (optional accessory)
Activity Step
Free use 7
Note
The listed indications are only examples. To prevent unnecessary risk, ob-
serve the guideline speeds given by the manufacturer of the rotating instru-
ments.
4.15.8 Using the surgical motor with "Free application"
activity
In the activity, "Free application", all available values can be set.
Note
The user should always check if the displayed transfer ratio is correct before
turning on the device.
Setting the parameters
The following parameters can be changed:
▪ Maximum torque
▪ Programmed speed
▪ Coolant flow
▪ Transmission ratio
▪ Direction of motor rotation
▪ Activity
Changing and saving parameters
▶ Use the "slider" to set the speed and torque.
▶ Tap the "NaCl" key to select the coolant flow rate.
▶ Select the transmission ratio and torque mode from the respective list.
▶ Tap the "Direction of motor rotation" key to toggle between clockwise and
counterclockwise rotation.
▶ Tap the "Save" key to save the parameter.
▶ Tap the "Cancel" key to close the menu without saving.
ð
The changed parameters are saved to the selected parameter memory loca-
tion.
Icon Speed
[rpm]
300 –
40,000
40,000 (D)
300 – 2,500 0.7 – 5.5
300 – 2,000 0.8 – 5.5
300 – 1,500 1.1 – 5.5
130 / 178
Torque Transmis-
[Ncm] sion ratio
0.1 – 5.5 1:1
3 (D)
16:1
20:1
27:1