Moving The Patient Chair; Adjust The Motorised Headrest - KaVo ESTETICA E70 Vision Instructions For Use Manual

4.6 Moving the patient chair

4.7 Adjust the motorised headrest

The motorised support for the headrest allows you to optimally situate the pa-
tient with easy manual manipulations. The compensated sequence of move-
ments move the patient's head into an anatomically correct position.
The headrest can be adjusted manually using the joystick switch on the head-
rest, the dentist's or assistant's unit, or automatically by means of a preset
automatic position.
Requirement
Function level 3 is active. Quadrant 2 lights up.
If the desired function level is not activated, press the "Mode" key (possibly
repeatedly, if needed).
Please refer to: Setting the function level
The height and angle of the headrest can be set using the dentist control unit.
The four-button wheel assumes the function of the joystick switch.
The following buttons can be used to adjust the motorised headrest:
Instructions for use ESTETICA E70 Vision / E80 Vision
4 Operation | 4.6 Moving the patient chair
55 / 178