Foreseeable Misuse - Danfoss VLT ISD 410 Operating Instructions Manual

Safety Instructions
•
It must be ensured that the products are installed
in conformance with the regulations mentioned
in the documentation
•
The specified maintenance and service intervals
must be observed
•
All protective measures must be complied with
•
Only the components described in these
operating instructions may be fitted or installed.
Third-party devices and equipment may be used
only in consultation with Danfoss
•
The documentation must be read completely and
correctly followed
The servo system may not be used in the following
application areas:
•
Areas with potentially explosive atmospheres
•
Mobile or portable systems
•
Floating or airborne systems
•
Inhabited facilities
•
Sites where radioactive materials are present
•
Areas with extreme temperature variations or in
which the maximum rated temperatures may be
exceeded
•
Under water

3.7 Foreseeable Misuse

Any use not expressly approved by Danfoss constitutes
misuse. This also applies to failure to comply with the
specified operating conditions and applications.
Danfoss assumes no liability of any sort for damage attrib-
utable to improper use.
®
VLT ISD 410 Servomotor Operating Instructions
®
MG75D102 - VLT is a registered Danfoss trademark
3 3
11