Diagnostics; Diagnostics Overview Of The F-Tm Servodrive - Siemens SIMATIC ET 200SP F-TM Equipment Manual

Interrupts, error messages and diagnostics and system alarms

10.2 Diagnostics

10.2 Diagnostics
10.2.1

Diagnostics overview of the F-TM ServoDrive

Diagnostic view of the CPU and its associated I/O
If you go online to the CPU and establish an online connection via the CPU to the
F-TM ServoDrive, this occurs within the project context.
Procedure
To display the diagnostic information for the F-TM ServoDrive, follow these steps.
1. Select the F-TM ServoDrive in the project tree, for example under "Ungrouped devices":
2. Double-click "Online & diagnostics".
The "Diagnostics - General" window appears.
3. Navigate to the required information.
The diagnostic window is divided into the following diagnostic groups:
● General
The general diagnostic information is displayed for:
– Module
– Module information
– Manufacturer information
● Diagnostics status
"Diagnostics status" shows the current diagnostics status of the F-TM ServoDrive.
● Active messages
"Active messages" displays the currently pending alarms and faults in the
F-TM ServoDrive.
● Drive diagnostics
The current diagnostic information of the drive is displayed for:
– Status bits
– Operating values
– Encoders
– Temperatures
– Inputs
92
Equipment Manual, 02/2020, A5E47579503-AA
F-TM ServoDrive