Maintenance - Siemens SIMATIC ET 200SP F-TM Equipment Manual

SIMATIC Automation Tool
You can use the SIMATIC Automation Tool to perform commissioning and maintenance
activities simultaneously on various SIMATIC S7 stations as a bulk operation independent of
TIA Portal.
The SIMATIC Automation Tool provides a multitude of functions:
● Scanning of a PROFINET/Ethernet system network and identification of all connected
CPUs
● Address assignment (IP, subnet, gateway) and station name (PROFINET device) to a
CPU
● Transfer of the date and the programming device/PC time converted to UTC time to the
module
● Program download to CPU
● RUN/STOP mode switchover
● CPU localization by means of LED flashing
● Reading out of CPU error information
● Reading of the CPU diagnostics buffer
● Reset to factory settings
● Firmware update of the CPU and connected modules
You can find the SIMATIC Automation Tool on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/98161300).
PRONETA
SIEMENS PRONETA (PROFINET network analysis) allows you to analyze the plant network
during commissioning. PRONETA features two core functions:
● The topology overview automatically scans the PROFINET and all connected
components.
● The IO check is a fast test of the wiring and the module configuration of a plant.
You can find SIEMENS PRONETA on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/67460624).
F-TM ServoDrive
Equipment Manual, 02/2020, A5E47579503-AA
ET 200SP Documentation Guide
11