Mounting - ADJ MB DMX II User Manual

M O U N T I N G
The MB DMX II ships with a built-in rigging point, and two large holes in the base of the unit used as
safety cable attachment points. The rigging point is located on the top of the unit. This rigging point
is secured to the fixture by two large Phillips screws. When the rigging point is not used, as when the
fixture is shipped from the manufacture, the rigging point is shipped inverted (inside the top of the
unit). When the fixture is hung from a truss or or similar means, use the rigging point, and secure the
fixture with safety cables. The MB DMX II is to mounted in bottom-up position to a ceiling, or may hang
from the truss using a C-Clamp rated at 50 pounds or higher.
Rigging Point
15
Safety Cable
Attachment Point
Safety Cable