Preparing for Installation
You may have to do some conguration for appropriate data interchange with a
new printer. This chapter gives you general guidance for these tasks.
You can use SAM (System Administration Manager) procedures to make
your printer installation easier. SAM can determine the status of any of your
connected devices and will perform the necessary software installation of the
printer for you.
If you don't want to use SAM to install the printer, or if SAM is not on your
system, you can also use HP-UX commands directly to accomplish the same
tasks. For information on using manual system administration procedures for
System Administration Tasks .
this, see the manual
6
6-2
Configuring HP-UX for Printers