Changing Your VXI/MXI Configuration
SICL includes some Model V743 VXI controller conguration utilities that are
used to change the VXI Shared Memory in the VXIbus conguration.
Changing the VXI Shared Memory
You can reserve 1 MByte of the Model V743 VXI controller system memory to
be used as VXI shared memory in A24 address space. The Model V743 VXI
controller is shipped with this feature disabled. When enabled, 1 MByte of the
system memory becomes unavailable for use by HP-UX and your applications.
Instead, this memory is mapped onto the VXI backplane for use as VXI shared
4
memory. You can use the SICL \
feature by executing the following:
On HP-UX 9:
/usr/pil/bin/e1497cnf -i vxi
On HP-UX 10:
/opt/sicl/bin/e1497cnf -i vxi
See the \Customizing your VXI/MXI System" chapter in the
Guide for HP-UX for more information on using the
Note
4-4
Configuring for a VXI/MXI System
e1497cnf
You must be super user in order to run this utility. This utility
also requires you to reboot the system.
" utility to enable or disable this
HP SICL User's
utility.
e1497cnf