Overview - HP 9000 700 Series Owner's Manual

Overview

2
The Model V743 VXI controller uses the standard HP-UX operating
system, a highly versatile system for multitasking, running your application
programs, and performing a variety of development tasks. For information
on installing HP-UX 9, see the manual
(and the 9.05 Release Notes for updates). For HP-UX 10, see
HP-UX 10 (and the Release Notes in the
updates).
To get started with using HP-UX, rst read your
go to Chapter 3 in this manual for information on booting and running the
system.
Manuals for System Information
If you have not installed your hardware or started your controller, refer to the
Installation Guide for the Model V743 VXI controller before going on.
HP-UX
After you have done the procedures in the
V743 VXI controller, you may want to see the following sources for further
information:
For HP-UX administration information, see
For a quick reference to commonly used HP-UX commands, see the
Appendix in
HP VUE is the default interface for HP-UX. At some point, you may want to
interact with the Model V743 VXI controller using HP VUE via the LAN,
with an X Window System display. As a simpler window alternative, you
can also use the X Window System by itself. Both are included in HP-UX.
For further information, see the manual
HP-UX , or HP VUE User's Guide .
The following manuals will also be useful:
If you have not yet installed your HP-UX system, see
Updating HP-UX 9.03 (and the 9.05 Release Notes in
2-2 Finding Information About Your System
Using HP-UX .
Installing and Updating HP-UX 9.03
directory for
/usr/share/doc
Installation Guide , then
Installation Guide for the Model
System Administration Tasks .
Using the X Window System , Using
Installing and
etc/newconfig
Installing
for