HP 9000 700 Series Owner's Manual page 91

Vxibus
Hide thumbs Also See for 9000 700 Series:
Table of Contents

Advertisement

You will see the message:
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Auto Boot discontinued
6. At the Main Menu, select
will see a display like the following:
==== BOOT FROM DEVICE ========================
Key Boot Device
--- -----------------------------------------
1 SCSI.6.0 HP C2233
2 LAN.080009-72333
3 LAN.080009-72345 INSTALL
4 SCSI.4.0 CD-ROM HP nnnn
--- -----------------------------------------
0 Previous Menu
33 Effective ISL Mode [ AUTOMATIC ]
66 Rescan for Boot devices
77 Reset the System
----------------------------------------------
To boot from a device, Press Key, then press [Enter/Return]
7. Select the DDS drive (product number HP 35450A, in the example) by
typing the number of the line for the device (\
by
.
4 Enter 5
8. Your recovery system should begin loading from the tape. Once your
recovery system is running, you will have a minimum set of commands
to use. These will help you repair and restore your primary (disk-based)
operating system.
9. From this point, the speci c things you need to do to recover your primary
system depend on the nature of the boot problem. Some possibilities are
outlined in the following list:
If your inability to boot your system is caused by faulty
Note
hardware, it will be necessary to have that hardware repaired
before you can proceed with the items in this list.
a. Run the
program to repair your root le system. If you do this
fsck
make sure you rst shutdown to the single-user mode.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Boot from a Device
15.99.255.25
15.88.123.456
", in the example) followed
1
Backing Up and Restoring Software
by typing 1
. You
4 Enter 5
8
8-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

V743/100V743/64

Table of Contents