HP 9000 700 Series Owner's Manual page 98

You will see a list of bootable devices and LAN addresses, such as the
following:
==== BOOT FROM DEVICE ========================
Key Boot Device
--- -----------------------------------------
1 SCSI.6.0 HP C2233
2 LAN.080009-72333
3 LAN.080009-72345 INSTALL
4 SCSI.4.0 CD-ROM HP C2943A
--- -----------------------------------------
0 Previous Menu
33 Effective ISL Mode [ AUTOMATIC ]
66 Rescan for Boot devices
77 Reset the system
----------------------------------------------
To boot from a device, Press Key, then press [Enter/Return]
4. If you are running a disked system and no disk devices are found, then you
may have a hardware installation problem. In this case, you should recheck
the connection to the SCSI devices and try the boot again. If this still
results in no devices being listed, contact your HP Service Representative for
assistance.
If the search locates a disk, enter the device selection number (\
the example above) to boot from that device. (Make sure that it is not
indicated as an \Install" operating system.)
Boot messages should begin to appear on the screen after several seconds.
For detailed help in troubleshooting the boot process, see the manual
HP-UX Problems . For additional detail about boot ROM con guration, see
\Booting and Resetting the VXIbus Mainframe" in Appendix B in this manual.
9
9-6 Dealing With Problems
15.99.255.25
15.88.123.456
", in
1
Solving