HP 9000 700 Series Owner's Manual page 112

A
8. Using the Pozidriv screwdriver, remove the screw holding the RFI cover
(with speci cations printed on it) from the top side of the board.
9. Place the tip of a at-tipped screwdriver through the slot in the RFI cover
next to to the screw hole. Then pry the top cover
(0.32 in.) to disengage the RFI cover front tabs from the system board and
bottom cover.
A-6 Installing Additional Memory
Figure A-2. Removing RFI Cover
back about 8mm