Table of Contents
Advertisement
Proceed to Step 3, ( Rebooting Your System ).
Step 2b: Recovering from a File System Problem
If the panic message indicates a problem with one of your le systems, you will
need to run the le system checker
This is normally done automatically at boot time (from the
you should proceed to Step 3, \Rebooting Your System". Follow all directions
that
gives you
fsck
problem . It is important to use the \
requested to do so by
Step 2c: Recovering from a LAN Communication Problem
If the panic messages indicates a problem with LAN communication (such as
when a diskless cluster client node is prevented from communication for too
long), check all LAN cable connections to ensure the following:
All connectors are tightly fastened to the LAN cable and the media access
units (MAUs).
LAN is assembled correctly and does not exceed recommended lengths. If
you use an AUI, the LAN must be connected
intervening length of cable between the MAU on your Model V743 VXI
controller to the LAN tee.
Your LAN is properly terminated.
Proceed to Step 3, ( Rebooting Your System ).
Step 2d: Recovering from Other Situations
When you suspect the problem was something other than the above (or when
you do not know where to classify it), proceed to Step 3, Rebooting Your
System . In this case, it is especially important that you write down the
text of the panic message, just in case you need it for future troubleshooting or
help from HP service personnel.
Step 3: Rebooting Your System
Once you have checked for and corrected any problems from Step 2, you are
9
ready to reboot your system. You can reboot your system using the Rst/Abt
9-10
Dealing With Problems
to check and correct the problem(s).
fsck
especially if the root le system ( \
" option to the
-n
during any subsequent reboot.
fsck
le) so
/etc/rc
" directory) has the
/
command if
reboot
directly to the MAU with no
exact
Advertisement
Table of Contents
