HP 9000 700 Series Owner's Manual page 76

choice has an asterisk placed by it, by pressing
highlighted.) Choose
9. You will next be given a choice of whether to install the new kernel now or
later. If you move the kernel into place now, the system will also reboot.
If you choose to do it later, you can then move the new kernel and reboot.
You should also move:
On HP-UX 9:
/etc/conf/dfile.sam
/etc/conf/dfile.sam
On HP-UX 10:
/stand/system.sam
/stand/system.sam
If you reboot, the old kernel will be backed up as
or
/stand/system.prev
10. Exit SAM, if you have not already done so.
Note
Your system is now running the added driver for SCSI DDS tape drive. You
are ready to use the drive to load a tape into your system.
7
7-6 Configuring HP-UX for a DDS Tape Drive
NNNNNNNN
to con rm your choice of action.
OK
to
/hp-ux
to
/etc/conf/dfile
to
/stand/vmunix
to
/stand/system
on HP-UX 10.
If you are modifying a cluster client's kernel, its kernel is not
backed up, since
/SYSBCKUP
server's kernel.
while that line is
4 Enter 5
on HP-UX 9,
/SYSBCKUP
is used exclusively for the cluster