Testing The Printer Installation - HP 9000 700 Series Owner's Manual

15. In the
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Add Local Printer/Plotter
choose the box labeled
16. Choose
NNNNNNNN
.
OK
17. If the print spooler was not previously running, a screen will appear with
the question: NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Do you want to start the print spooler now?
NNNNNNNNNNN
or press
Yes
4 Enter 5
18. You will see a con rmation screen asking if your printer is turned on,
connected to your system, and online. Check your printer to ensure that it
is ready, and press
19. You will see the message
20. Exit the task and press the
21. Type
exit
4 Enter 5
System Administration Tasks for additional SAM information.
Refer to

Testing the Printer Installation

If you made your printer the default system printer, type the following
commands to test it:
cd
4 Enter 5
lp .profile
4 Enter 5
(If your printer (called
following command to test it:)
printername
lp -d
The le named
.profile
display which reappears, select and
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Make this the system default printer
.
.
4 Enter 5
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Task completed
NNNNNNNNNNNNNNNNNNNNNNNNNN
function key.
Exit SAM
to exit and return to
root
printername ) isn't the default system printer, enter the
.profile
4 Enter 5
should print out on the new printer.
. Press .
4 Enter 5
status.
user
Configuring HP-UX for Printers
.
. Choose
6
6-5