Viewing The Vxibus System Con Guration; Vxi/Mxi Con Guration Les - HP 9000 700 Series Owner's Manual

Viewing the VXIbus System Configuration
You can use the SICL
and print a human readable display:
On HP-UX 9:
ivxisc /usr/pil/etc/vxi16
On HP-UX 10:
ivxisc /etc/opt/sicl/vxi16
See \The HP SICL Utilities" chapter of the
for information on using this utility.
The boot-up initialization line is commented out by
Note
default. You
the
/usr/pil/etc/iproc.cf
/etc/opt/sicl/iproc.cf
resource manager to run on boot-up.
boot ivxirm -p I vxi
VXI/MXI Configuration Files
The VXI/MXI con guration les are used to specify some site-dependent
con guration rules and any changes from the default. These les are not
usually edited except under special circumstances. See the
Guide for HP-UX for more details on these les and when you want to make
changes to them.
utility to read the current system con guration
ivxisc
HP SICL User's Guide for HP-UX
must un-comment the following line in
le on HP-UX 10, in order for the
Configuring for a VXI/MXI System
le on HP-UX 9, or the
HP SICL User's
4
4-11