1 Preparing for installation
Package contents
Controller
Power supply
Self-adhesive rubber feet
Documentation
Identifying controller components
The following figures show the various controls and connectors on the controller.
Controller rear panel
1: Power
2: Reset button
3: LAN port
Controller front panel
1: Power LED
2: LAN port LED
3: Internet port LED
LAN port and Internet port
The controller has two auto-sensing 10/100/1000 Ethernet ports, each with a corresponding
status light on the front panel. The LAN port supports Power over Ethernet (PoE) 802.3af, enabling
the controller to be powered by a PoE switch or PoE power injector.
Reset button
Press and quickly release the button to reset the controller. This button can also be used to reset
the controller to factory defaults. See Resetting to factory defaults in the MSM7xx Controllers
Configuration Guide.
4
Preparing for installation
1
2
4: Internet port
5: Console port
1
2
3
3
4
5