Hendi 274125 User Instructions page 19

7.8.1. Assembling the bowl
• Fig. 37 shows a bowl which is not correctly assem-
bled; here the bowl does not perfectly adhere to the
machine edge.
Fig. 37
• Fix the bowl to the machine body using the relevant
hook-on handles, as illustrated in the figure;
Fig. 38
• Insert the mixer auger into its seating;
Fig. 39
• Insert the mixer into its seating following the steps
described in paragraph 7.3 in inverse order.
Fig. 40
To assemble the tap, carry out in reverse all of the
disassembly steps illustrated previously (Fig.32 to
Fig.27).
To fit the level (F) push the rod (D) from the inside until
the guides protrude; the insert the level (F) and slowly
release the rod (D).
Fig. 41
EN
19