Hendi 274125 User Instructions page 10

5.3. Disposal of packing materials
After opening the box, make sure to separate the
packing materials according to type and dispose of
them in accordance with the current regulations in
5.4. Electrical connection
This job may be performed only by specialized tech-
nical personnel.
Before inserting the plug into the mains power sock-
et, make sure that:
• the line voltage used is the same as the value indi-
cated on the manufacturer's rating plate;
• the main switch is set to -OFF-.
If the machine is being connected to the electricity
mains for the first time, this operation must be per-
formed by a specialized technician, while the Cus-
Warning: the electric outlet must be situated in a
place easily within raach of the user, so that no ef-
fort is required in order to disconnect the machine
from the power supply when necessary.
It is forbidden:
EN
• to use extension cords of any type;
• to replace the original plug;
• to use adaptors.
10
the user's country.
We recommend keeping the box for future convey-
ance or transport.
tomer will be responsible for and have to take care of
any subsequent connections
The machine must be connected to the electricity
mains by means of the plug flitted on the power cord.
Be sure to comply with:
• the technical regulations and standards in force at
the time of installation;
• the data shown on the rating plate on the side of
the machine
If the power cord is damaged, you must have it re-
placed either by the manufacturer or a specialized
technician.