Peration - Hendi 274125 User Instructions

6. 0PERATION

Before the machine may be started up for the first time, specialized technical personnel must check that it
function properly
6.1. Starting up
To start up the machine carry out the following steps:
• Make sure that the switch is set to off;
• Take off the lid
• fill the boiler tank with water using the boiler tank
level indicator tray, until it reaches the maximum
value indicated on the tray itself, which is marked
–MAX-
Fig. 6
Warning: fill the boiler tank by pouring in water
slowly and check for a few seconds to make sure that
the water level has reached the –MAX-level and that
it is stable.
When filling an empty boiler rank for the first time,
the amount of water needed to completely fill the
tank is approximately 3.25 litres (0.86 GAL US)
Remove the lid and pour the beverage prepared accord-
Fig. 7
ing to the manufacturer's instructions into the bowl.
• Never exceed the maximum level, which is marked
–MAX- on the tray itself.
• after pouring the product into the bowl, fit the lid
back in place.
• make sure that the plug has been inserted into the
mains socket.
• press the main switch to start the machine; the
Fig. 8
product inside the bowl will start to be mixed:
• Set the thermostat to the required temperature to
heat the product inside the bowl.
• The machines with LCD offer the opportunity to
Fig. 9
make a visual check to see when the product has
reached the required temperature inside the bowl
Warning: during bowl and/or boiler switch off the
machine using the main switch (LED off).
There is a temperature sensor, if the water is boiled
up and the heating element is over heated. The tem-
perature sensor will shut down the machine. Then
you need to press the reset button to restart the ma-
Fig. 10
chine (Ref.to 7.14).
Lit LED: MCHINE ON-
LED off: MACHINE OFF.
EN
11