Operation For Each Axis; Changing The Display Axis - Magnescale LY71 Instruction Manual

2. Applied Operation

2-13. Operation for each Axis

When using a measuring units with two axes, the following operations can be performed for each axis.
• Restart
• Hold
• Switching of display data
• ABS/INC display switching
These settings are made after pressing the
To make the settings for all axes, do not press the
Example 1
1
Press the key on counter display A.
2
Press the key.
........ This performs switching for counter display A only.
3
Press the key.
........ The setting is saved.
Reference
key →
Counter display B
key →
Counter display A
key →
Counter display B
(Note)
The axis displaying the same measuring unit data also operates simultaneously with the axis.
Example:
Counter display A: Maximum value of 1st axis
Counter display B: Minimum value of 1st axis

2-14. Changing the Display Axis

This can display the 1st axis input on counter display B and the 2nd axis input on counter display A.
➔ Installation manual "4-3. Advanced Settings" (Display axis, and display data at power ON)
2-6
(E)
key on the counter display of the axis to be set.
key before making the settings.
(Note)
key : B only is restarted.
key : Hold function is enabled for A only.
key: B only is switched to Absolute value display.
(Note)
LY71