Pausing Updates Of Display Data (Latch); Changing The Display Scale; Reducing Flickering Of The Minimum Digit; Disabling Key Operation (Preventing Accidental Operation) - Magnescale LY71 Instruction Manual

2. Applied Operation

2-6. Pausing Updates of Display Data (Latch)

If you prefer to read selected position data without pausing the calculation itself, updating of the display
only can be paused.
1
Select in the Hold setting.
➔ Installation manual "4-3. Advanced Settings" (Hold function)
2
Press the key.
........ Updating of the display data is paused. (The
Restarting
Press the key. (The
∗ Pause can be performed by input from an external signal.

2-7. Changing the Display Scale

This sets the count display magnification. This is effective for situations such as when measuring an object
where the scale was changed.
➔ Installation manual "4-3. Advanced Settings" (Scaling)

2-8. Reducing Flickering of the Minimum Digit

If the number for the minimum digit of the display value is unstable and difficult to check, flickering of the
display can be reduced.
➔ Installation manual "4-3. Advanced Settings" (Flicker control)

2-9. Disabling Key Operation (Preventing Accidental Operation)

This locks key operation to prevent unintended operations.
➔ Installation manual "4-3. Advanced Settings" (Key lock)
After making the setting, the only valid key operations are the
A password must be entered to remove the key lock. Pressing the
display.
➔ Installation manual "4-3-9. Key Lock"
2-4
(E)
lamp lights off.)
lamp lights on.)
(Standby) key and
key displays the password input
key.
LY71