FlowLine Commander LI90 Series Quick Start Manual page 8

PUMP CONTROLLER (APPLICATION #3)
Overview
This application is used to provide multiple relay
contacts for a single 4-20 mA input. Relays 5 and
6 can be combined to be programmed as duplexing
/ alternating relays
Overview Specs
This application operates with12 to 24
Power:
VDC power.
The Commander Controller
Incoming Data:
accepts a single 4-20 mA channel, powered by 12
to 24 VDC power source.
Six relays are available to
Outgoing Data:
program as alarms, pumps, or valves.
CHANGING APPLICATIONS:
If you need to change the application selection, press and hold the ESC button for
5 seconds. This will return you to the Selection Screen and allow for a new
application to be selected. The selection can be accessed at any time.
| 8 QS301036 Rev A1