Intended Use - Fasel Elektronik FCU2000 Series Operating Manual

Safety
The operating instructions are to be read carefully before switching on the unit! To en-
sure safe operation and safe working practices you must comply with all the given
safety and handling instructions.
If you have any doubts, please contact your customer service.
Inadequate
qualifications
Tips and
recommen-
dations

1.2 Intended use

The FASEL Steam bath controls of the series FCU2000, FCU3000 and FCU4000 are
solely intended for operating and controlling steam bath cabins. The control units are
approved for private and commercial use.
Intended
use
6 Operating manual Steam bath control Series FCU2000/FCU3000/FCU4000_ B_FCUxxxx-Steam_EN / Version V 2.03
– their physical, sensory or mental abilities or
– Lack of experience and / or knowledge which prevent the safe use of the device
without supervision or instruction.
Children playing with the device.
WARNING!
Danger caused by inadequate qualifications!
Improper handling could lead to considerable personal injuries
and damages to property.
Therefore:
The assembly, installation, commissioning, troubleshooting, mainte-
nance and repair work should be carried out only by qualified persons
unless otherwise mentioned.
NOTE!
...highlights useful tips and recommendations as well as information for an
efficient and smooth operation.
CAUTION!
Danger caused by improper use!
Using the steam bath control for purposes other than the intended use
could lead to dangerous situations.
Therefore:
– Use the steam bath control only for the intended purpose.
– Operate the steam bath control only within the permissible ambient
temperature and humidity range. → See page 8.
– All the information in the operating and installation manual are to be
strictly followed.
– When not in use switch off the main switch (230V) or fuses
– Before switching on the steam bath control make sure that no ob-
jects are placed on the oven.