Adjust The Flavour Feed - Fasel Elektronik FCU2000 Series Operating Manual

5.5.1

Adjust the flavour feed

The control unit is turned on.
1.
Fig. 6: " flavour feed" view (example)
2.
3.
4.
Parameter
Spray
Pause
Table 9: Parameter description menu " flavour feed"
Operating manual Steam bath control Series FCU2000/FCU3000/FCU4000 B_FCUxxxx-Steam_EN / Version V 2.03

Press the (Adjust flavour) key or







Press the key. Last digit flashes.
Adjust the desired parameters "Pause (in min.)
Change between "Pause" and "Spray".
Press key: Move the cursor to the left.
Press key: Move the cursor to the right.
Adjust the desired value.
Press the key: reduce value.
Press the key: increase value.
Note!
After the digit "9" or "0", the higher digit of the temperature value is changed. That
is "20" is displayed after "19".
You can also select the higher digit using the
Press the key. The adjusted value is accepted.
NOTE!
If the key is not operated for a few seconds, the program automatically
switches back to the "main" view. (If the controller has a timer and it is
active, he switches into the timer menu.)
key till the following view is displayed.


Description
Duration of flavour feed in seconds
Time between two flavour feeds in minutes.
/
Spray (in sec.)".
key or key and then change.
Operation

21