5.
5.8
Options menu
5.8.1
Adjust bench temperature – (optional)
Fig. 9: "Options menu (bench temperature)" view (example)
In this menu, you can adjust the set point value for "bench temperature" within the pos-
sible operating range. Change the values as described in chapter 5.4.
,
5.8.2
RGB-LED brightness (only for FCU4xxx and menu "Pro")
In this menu you can set the brightness of the RGB-LEDs.
1.
Operating manual Steam bath control Series FCU2000/FCU3000/FCU4000 B_FCUxxxx-Steam_EN / Version V 2.03
Press the
key: Reduce value.
Press the
key: Increase value.
0: slow step
9: quick step
Press the
key. The adjusted value is accepted.
NOTE!
The menu "bench temperature" is only available if this option is avail-
able in your device.
NOTE!
The "RGB-LED brightness" menu is only available for control devices
which are connected to a RGB-LED control from the company
Licht2000.
-Press the key until you see the following view:
Not available with FCU2000 and
FCU3000!
Operation
23