Colour Light Start (Only For Menu "Pro") - Fasel Elektronik FCU2000 Series Operating Manual

Operation
11. Press the
12. Exit the menu using the
13. If the option "auto" is selected, the line "colour program no." is displayed. Select
14. Press the
15. Exit the menu using the
16. If the option "manual" is selected, the active colour lamps are displayed. With the
17. Select one or two (mixed colour) colour lights with the
18. Press the
19. Exit the menu using the
5.8.4

Colour light start (only for menu "Pro")

Here you can set the starting time for the colour light.
26 Operating manual Steam bath control Series FCU2000/FCU3000/FCU4000_ B_FCUxxxx-Steam_EN / Version V 2.03
Key: Select "auto".
– "auto" is enabled. The symbol "auto" (symbol no. 10) appears in the display.
Key: Select "manual".
Key: without function
key. The selection is saved.
key.
"colour program no." and enable.
– "1" is displayed for "colour program no."
Key: without function
Key: Select colour program no. 2.
– "2" is displayed for "colour program no."
Key: Select colour program no. 1.
Key: without function
key. The selection is saved.
key.
option "lamps", the number of colour lamps can be edited.
combinations are possible:
– 1 / 1 + 2 / 2 / 2 + 3 / 3 / 3 + 4 and 4
Note!
The possibility of selecting mixed colours is set in the service menu. For modifica-
tion requests, contact the installer or dealer of your sauna system.
key. The selection is saved.
NOTE!
The "Colour light start" menu is only available for control devices with
the extension board type FCU-EXT-COLOR LIGHT or a RGB-LED con-
trol from the company Licht2000.
key or select the next line with the
key or select the next line with the
key. The "colour light mode" view (fig. 10) is displayed.
or
or
or key. The following