17. Press the
18. Exit the menu using the
6.2.3
Versions and data (only for menu "Pro")
This menu is used for service to, for e.g., quickly find the cause of fault with the versions
given here.
1.
2.
Fig. 32: "Versions and data" view (example)
3.
4.
Fig. 33: "HW and SW versions" view (example)
5.
6.
Operating manual Steam bath control Series FCU2000/FCU3000/FCU4000 B_FCUxxxx-Steam_EN / Version V 2.03
key. The selection is saved.
Press (basic settings)
Press the
key until you see the following view:
Press the
key.
Following view is displayed:
With the
or
key you can navigate within the menu. The following information is
displayed here:
– Software version of the control board and the keyboard PCB
– Device configuration
– Customer configuration
– Configuration of the optional inputs and outputs
Exit the menu with the
key.
key. The lamp next to the key must light up.
key.
"Basic settings" menu
39