Design And Function; Function; Steam; Aroma - Fasel Elektronik FCU2000 Series Operating Manual

4

Design and function

4.1

Function

Depending on the model, the control unit is suitable for the following modes:
4.1.1

Steam

In the "Steam" mode, the cabin is heated to the desired temperature (set point tempera-
ture) with the help of a vaporiser. In order to maintain the desired temperature in the
cabin, the control unit switches the vaporiser on and off.
As long as the vaporiser blows "steam" into the cabin, the status display "Steam gen-
erator" lights and the display shows "Heat-up phase". Once the desired temperature is
reached, this message disappears. The cabin is ready for use.
4.1.2

Aroma

With the help of the "Aroma" function, you can select the time intervals and the duration,
for which aromas will be blown into the cabin (blowing time). As long as aromas are
blown, the status display shows "Aroma".
4.1.3 Seat heating – (optional)
In the "Seat heating" function, a steam bath bench with seat heating is additionally
heated.
For this purpose, the "bench temperature", to which the bench should be heated, can be
adjusted. As long as the seat heating is working, the status display "Seat heating" lights
up.
Operating manual Steam bath control Series FCU2000/FCU3000/FCU4000 B_FCUxxxx-Steam_EN / Version V 2.03
Steam
Aroma
Seat heating (optional)
Design and function
9