Basic Settings" For Options; Rgb-Led Settings (Only For Fcu4Xxx And Menu "Pro") - Fasel Elektronik FCU2000 Series Operating Manual

"Basic settings" menu
6.2

"Basic settings" for options

6.2.1

RGB-LED settings (only for FCU4xxx and menu "Pro")

In this menu you can program the fading time (the time for a smooth colour transition
from one colour to another) for RGB-LEDs.
1.
2.







Fig. 28: "RGB-LED settings" view
3.
4.








Fig. 29: "RGB fading time – change mode" view (example)
5.
6.
36 Operating manual Steam bath control Series FCU2000/FCU3000/FCU4000_ B_FCUxxxx-Steam_EN / Version V 2.03
NOTE!
These menus appear only if the corresponding options board is avail-
able in the control unit.
HINWEIS!
The "RGB-LED settings" menu is only available for control devices
which are connected to a RGB-LED control from the company
Licht2000.
Press key (basic settings). The lamp next to the key must light.
- Press the key until you see the following view:
Press the key.
Following view is displayed:
Select one of the following lines with the
– hand (→ point 7)
– auto (→ point 10)
Press the key. The selected line is enabled.
Not available with FCU2000 and
FCU3000!
Not available with FCU2000 and
FCU3000!
or key: