"Basic settings" menu
6
"Basic settings" menu
6.1
"Basic settings" - general
6.1.1
Time and Weekday
In this menu you can set the time and the weekday.
1.
2.
Fig. 15: View „Change values" (example)
3.
4.
Fig. 16: View „Change values – change mode" (example)
5.
6.
7.
8.
9.
28
Operating manual Steam bath control Series FCU2000/FCU3000/FCU4000_ B_FCUxxxx-Steam_EN / Version V 2.03
Press key
(basic settings). The lamp next to the key must light. The weekday
appears only, if the weekly timer is released.
The following view is shown:
Press
-key.
The following view is shown:
Select one of the following lines with the keys
– Time (→ point 7)
– Weekday (→ point 10) (only at FCU4xxx and if the weekly timer is enabled)
Press
-key. Selected line is activated.
Set the desired time. Last digit flashes.
Press
-key: reduce value.
Press
-key: increase value.
Press
-key: move cursor left.
Press
-key: move cursor right.
Press
-key. The selection is saved.
Exit the menu by using the
- or
-key or select the next line with the
:
or
-key.