Menu: Basic Settings; Info Menu; Maximum Permissible Heating Period - Fasel Elektronik FCU6x00 Series Installation And Operating Manual

Sauna control units
Table of Contents

Advertisement

6.5

Menu: Basic settings

The following entries may be shown in the basic settings menu, depending on the configuration:
Symbol
Description
PIN setting

Info menu

Service menu
Table 6: Menu: Basic settings
6.5.1
Info menu
The info menu is used to access all information about the control unit used. Use the key
The following information is shown:
1.
2.
3.
4.
5.
6.5.2

Maximum permissible heating period

Once the bath mode has been started, the display shows the remaining heating period
instead of the heating period. The heating period can only be changed in standby mode.
EN 60335-2-53 "Special requirements for sauna heaters and infrared cabins" permits
the following maximum heating periods:
Max. heating period
More than 12 hours
Max. 12 hours
Max. 6 hours
Table 7: Maximum heating period
The control units are delivered with a maximum adjustable heating period of 6 hours.
Please contact the installer or the dealer of your sauna or infrared system if you require
a heating period of more than 6 hours.
Installation and Operating Manual / Version V 1.02
Function
Opens the menu for the Pin setting
After entering the current pin, a new PIN can be entered.
You will be asked to assign a PIN when you connect for
the first time. Please make a note of this PIN. It can be
reset only on a sauna control unit with an operating ele-
ment or by a service engineer!
Opens the info menu
This menu shows information about the control unit, con-
figuration, sensor systems and add-ons.
Opens the service menu
This menu is used for initial operation/configuration and
can only be accessed by the service engineer.
to scroll one page forward.
Info: This shows the control unit's hardware and software version.
Configuration: This shows the control unit's basic configuration.
Inputs and outputs: This shows the configuration of the inputs and outputs.
Sensor: This shows all available sensor values (temperature/humidity).
Use the Back key
to close the menu at any time.
Description
Public cabins supervised by instructed staff.
Hotels, apartment blocks, etc.
All other cabins/private households
Operation
25

Advertisement

Table of Contents
loading

Table of Contents