6.4
Menu: settings
The following entries may be shown in the settings menu, depending on the configuration:
Symbol
Description
Fan levels
setting
Light dimming
Timer settings
(optional)
Coloured light settings
(optional)
Aroma settings
(optional)
Bench heating
settings
(optional)
Freely configurable option
(optional)
Basic settings:
Menu Back
Table 5: Menu: settings
6.4.1
Fan and light settings
The menu is used to adjust the cabin light and fan at 9 levels.
1.
2.
Installation and Operating Manual / Version V 1.02
Function
Press the key briefly to switch the fan on/off.
Press and hold the key to open the fan levels setting.
Press the key briefly to switch the cabin light on/off.
Press and hold the key to open the light dimming setting.
Opens the timer menu.
Press the key briefly to switch the coloured light on/off.
Press and hold the key to open the coloured light set-
tings.
Opens the aroma settings menu.
Press the key briefly to switch the bench heating on/off
Press and hold the key to open the menu to set the
bench temperature
Press the key briefly to switch the respective option
on/off.
Opens the basic settings menu.
Jumps to the previous menu.
This function is available in every menu.
Use the slider to set the preferred level.
Use the Back key
ues for the current bath mode will be saved automatically.
or Menu key
to close the menu at any time. The set val-
Operation
23