Colour Light Start (Only For Menu "Pro") - Fasel Elektronik FCU2000-IR series Operating Manual

14. Press the
15. Exit the menu using the
16. If the option "manual" is selected, the active colour lamps are displayed. With the
17. Select one or two (mixed colour) colour lights with the
18. Press the
19. Exit the menu using the
6.4.3

Colour light start (only for menu "Pro")

Here you can set the starting time for the colour light.
Option
FCU4x00
If power on
On heat-up phase
If bath is ready
Table 9: Parameter description menu "colour light"
1.
2.
B_FCUxxxx-IR / Version V 1.07
Key: Select colour program no. 2.
– "2" is displayed for "colour program no."
Key: Select colour program no. 1.
Key: without function
key. The selection is saved.
key.
option "lamps", the number of colour lamps can be edited.
combinations are possible:
– 1 / 1 + 2 / 2 / 2 + 3 / 3 / 3 + 4 and 4
Note!
The possibility of selecting mixed colours is set in the service menu. For modifica-
tion requests, contact the installer or dealer of your sauna system.
key. The selection is saved.
NOTE!
The "Colour light start" menu is only available for control devices with
the extension board type FCU-EXT-COLOR LIGHT or a RGB-LED con-
trol from the company Licht2000.
FCU2x00/FCU3x00



Select "colour light start".
Following view is displayed:
Operating manual Series FCU2000/3000/4000-IR
"General settings" menu
key or select the next line with the
key. The "colour light mode" view (fig. 10) is displayed.
Description
Start, as soon as control device is
switched on.
Start, as soon as a mode is active.
Start, as soon as the set point
temperature is reached.
or
or key. The following
23