Digital Equipment DEC 3000 Series Service Information page 345

Front-to-rear cooled systems
Hide thumbs Also See for DEC 3000 Series:
Table of Contents

Advertisement

? T-ERR-SCSI (bus) - Data Trans test - virt dma inq
T-ERR-SCSI (bus) - id = (device id) lun = (logical unit number)
info = (informational value)
T-ERR-SCSI (bus) - actcmd = (actual command)
curcmd = (current command)
status = (status) int = (interrupt)
T-ERR-SCSI (bus) - IR = (ir) CIR = (cir) IME = (ime)
T-ERR-SCSI (bus) - snskey = (sense key) extfru = (extended fru info)
? T-ERR-SCSI (bus) - Data Trans test - nondma inq not enough data
? T-ERR-SCSI (bus) - Data Trans test - nondma/dma inq size miscompare
? T-ERR-SCSI (bus) - Data Trans test - nondma/dma_nonal inq size
miscompare
? T-ERR-SCSI (bus) - Data Trans test - nondma/dma_nonal inq data
miscompare
? T-ERR-SCSI (bus) - Data Trans test - nondma/sync inq size miscompare
? T-ERR-SCSI (bus) - Data Trans test - nondma/sync inq data miscompare
? T-ERR-SCSI (bus) - Data Trans test - nondma/virt inq size miscompare
? T-ERR-SCSI (bus) - Data Trans test - nondma/virt inq data miscompare
T-ERR-SCSI (bus) - id = (device id) lun = (logical unit number)
T-ERR-SCSI TNF
- %s
The following error messages could indicate a system
board failure. Before replacing the board, try reseating the
board.
? T-ERR-SCSI (bus) - Map Err test - ir notval not set
? T-ERR-SCSI (bus) - Map Err test - ir parerr not set
T-ERR-SCSI (bus) - id = (device id) lun = (logical unit number)
T-ERR-SCSI (bus) - virt data addr = (data addr)
map reg addr
T-ERR-SCSI (bus) - map reg data = (map data) IR = (ir) CIR = (cir)
? T-ERR-SCSI (bus) - Map Err test - DMA inq err
T-ERR-SCSI (bus) - id = (device id) lun = (logical unit number)
info = (informational value)
T-ERR-SCSI (bus) - actcmd = (actual command)
curcmd = (current command)
status = (status) int = (interrupt)
T-ERR-SCSI (bus) - IR = (ir) CIR = (cir) IME = (ime)
T-ERR-SCSI (bus) - snskey = (sense key) extfru = (extended fru info)
The following error messages could indicate a SCSI device
or I/O board failure. Before replacing the device or board,
try reseating them.
LED Codes and Status/Error Messages
Note
= (map reg adr)
Note
14–23

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Dec 3000 600s axpDec 3000 400s axpDec 3000 900s axp

Table of Contents