Digital Equipment DEC 3000 Series Service Information page 306

Using the Console and Utilities Commands
13.16.11
Example
13.16.12
BOOT_RESET
13.16.13 Format
13.16.14
Example
13.16.15 CONFIG
13.16.16 Format
13.16.17
Example
13–34
This example displays the current OSFLAGS.
>>> SHOW BOOT_OSFLAGS
Result:
BOOT_OSFLAGS = 0,0
>>>
The BOOT_RESET parameter displays the value of the
BOOT_RESET variable.
To execute the SHOW BOOT_RESET command, enter the
following:
>>> SHOW BOOT_RESET
One of the following reset settings appears on the screen:
Resets Description
ON Enables system initialized before booting
OFF Disables system initialized before booting
This example shows the BOOT RESET set to ON.
>>> SHOW BOOT_RESET
Result:
BOOT_RESET=ON
>>>
The CONFIG parameter displays the system configuration and
device status.
To execute the SHOW CONFIG command, enter the following:
>>> SHOW CONFIG
Return
This example shows the system configuration and device status.
>>> SHOW CONFIG
Return
DEC 3000 - M600
Digital Equipment Corporation
VPP PAL X5.41-82000101/OSF PAL X1.28-82000201-Built on25-JUN-1993 09:54
Return
Return
Return