Digital Equipment DEC 3000 Series Service Information page 308

Using the Console and Utilities Commands
13.16.20
Example
13.16.21
DIAG_LOE
13.16.22 Format
13.16.23
Example
13–36
This example shows the current devices. See the following table
for further explanation of each column in this example.
>>> SHOW DEVICE
BOOTDEV ADDR DEVTYPE
------- ---- -------
ESA0 08-00-2B-1A-38-31 , THICK
..HostID.. A/7 INITR
..HostID.. B/7 INITR
>>>
Column Meaning
BOOTDEV Console boot name for the device
ADDR Either hardware address or SCSI ID
DEVTYPE Device type (RODISK is a read only disk)
NUMBYTES Drive capacity
RM/FX Indicates whether the drive has removable or
fixed media
WP Indicates whether the drive is write protected
DEVNAM Device name for the drive
REV Firmware revision level for the drive
The DIAG_LOE parameter displays whether the diagnostic loop
on error feature is selected.
To display the current DIAG_LOE parameter setting, enter the
following:
>>> SHOW DIAG_LOE
Return
This example shows that the current setting of DIAG_LOE is
OFF.
>>> SHOW DIAG_LOE
Return
Result:
DIAG_LOE = OFF
One of the following settings appears on the screen.
Setting Description
ON Enables loop on error feature
OFF Disables loop on error feature
NUMBYTES RM/FX WP
-------- ----- --
DEVNAM REV
------ ---