Digital Equipment DEC 3000 Series Service Information page 312

Using the Console and Utilities Commands
13.16.43
Example
13.16.44 MOP
13.16.45 Format
13.16.46
Example
13–40
This example shows the memory status information for a DEC
3000 Model 600/600S system.
SHOW MEMORY
DEC 3000 - M600 Memory: 80 Mbytes
------------------------------------------
BANK # MEMORY_SIZE
------ -----------
0 032 Mbytes
1 032 Mbytes
2 016 Mbytes
3 000 Mbytes
>>>
Response
Bank #
Banks 0 and 1
Banks 2 and 3
The MOP parameter indicates if the MOP network listener has
been enabled.
To execute the SHOW MOP command, enter the following:
>>> SHOW MOP
Return
One of the following network listener settings appears on the
screen:
Setting Description
ON Network listener enabled. Able to receive and
transmit messages on the network.
OFF Network listener disabled.
This command enables examining the current MOP status,
whether MOP is enabled or disabled.
>>> SHOW MOP
Return
START_ADDRESS
-------------
0x00000000
0x02000000
0x04000000
0x00000000
Meaning
Two memory slots. Each memory card can
be populated on both sides, totalling 64 MB
per SIMM card maximum (32 MB on each
side).
Occupy slot 1. Two-sided SIMMs consisting
of 64 MB.
Occupy slot 2. Single-sided SIMMs
consisting of 16 MB.