Table of Contents
Advertisement
Quick Links
1. Unpack the System
Accessories
(Not needed for
installation.)
Unpacking
Instructions
on Shipping
Carton
Ramp
Box
Tools needed for installation: Phillips screwdriver and scissors.
Quick Installation
Card and Door Keys
Information Envelope
(One per shipment - use
to inventory shipment.)
Factory Installed
Software
Installation Cards
Console Terminal
Cable
(17-01364-02)
Power Cord
Documentation
MLO-008895
1
Advertisement
Table of Contents
Related Manuals for Digital Equipment DEC 4000 600 Series
Summary of Contents for Digital Equipment DEC 4000 600 Series
- Page 1 1. Unpack the System Quick Installation Card and Door Keys Accessories (Not needed for installation.) Information Envelope (One per shipment - use to inventory shipment.) Factory Installed Unpacking Software Instructions Installation Cards on Shipping Carton Console Terminal Cable (17-01364-02) Ramp Power Cord Documentation MLO-008895...
- Page 2 2. Roll System Off Pallet WARNING: The system is heavy—at least 118 kg (254 lb). Two people are needed to move it off the ramp. Toggle up to unlock, down to lock (front and rear wheels). (10 ft) (10 ft) MLO-008896...
-
Page 3: Position The System
3. Position the System .5 m (1.6 ft) 1.1 m 1.7 m (3.7 ft) (5.5 ft) Service Area MLO-008885 Specification Measurement Height 883 mm (35 in) Width 499 mm (20 in) Depth 775 mm (31 in) Weight 124 kg (275 lb) max Operating temperature 10–35°C (50–95°F) Relative humidity (noncondensing) - Page 4 4. Check Switch Settings DC On/Off Switch Set to Off (O) Halt Switch Set to In Position Front H a l t AC Circuit Breaker Set to Off (O) Rear MLO-008886...
- Page 5 5. Connect Console Terminal Use the documentation that ships with the terminal to connect the keyboard and set up the console. Make sure the console baud rate is set to 9600.* If you have a modem, connect it now. Connect console terminal (17-01364-02).
-
Page 6: Connect Power Cords
6. Connect Power Cords Power Connection: To Wall Outlet WARNING: To reduce risk of injury, do not remove modules, storage devices, or power supply. No user-serviceable parts are inside. Refer servicing questions to a Digital service representative or qualified self-maintenance personnel. This equipment is not designed for connection to an IT power system (a power system without a directly... -
Page 7: Scsi Connection
DSSI terminator. Connect DSSI cable. © Digital Equipment Corporation. All rights reserved. AXP, DEC 4000, DECchip, OpenVMS, the AXP logo, and the DIGITAL logo are trademarks of Digital Equipment Corporation. OSF/1 is a registered trademark of Open Software Foundation, Inc. - Page 8 2. Console terminal 5. DC on/off switch (front) 3. Peripherals, expanders, and modems After about a minute, you will see two displays similar to the following: 08:52:07 Wednesday, July 29, 1992 Digital Equipment Corporation DEC 4000 Executing Power-Up Diagnostics Memory Storage...
-
Page 9: Installing Software
9. Installing Software If your system includes an internal disk drive pre-loaded with operating system software, then If you ordered. . . Refer to. . . OpenVMS Alpha AXP OpenVMS Factory Installed Software User Information, provided with your system. DEC OSF/1 Alpha AXP Guide to Starting the Factory Installed Software System, provided with your system. -
Page 10: Network Connections
Network Connections There are three networking options: ThinWire, standard Ethernet (thickwire), and 10BASE-T Ethernet. Follow the diagrams for the type of network you have. Option 1: ThinWire Ethernet Remove T-connector and terminator. Make sure Ethernet select switch is in Rear up position. - Page 11 Option 2: Standard Ethernet : Thickwire Slide Ethernet select switch to down position. Connect transceiver cable and push Lock lock down. Rear MLO-008891 Option 3: 10BASE-T (Twisted Pair) Slide Ethernet select switch to down position. Connect transceiver cable and push Lock lock down.
- Page 12 DEC 4000 Model 600 Series t a l Quick Installation Part Number: EK-KN430-IN. A01...