Using the Console and Utilities Commands
13.16.65
TRIGGER
13.16.66 Format
13.16.67
Example
13.17 START
13.17.1
Description
13.17.2 Format
13.18 TEST
13.18.1
Description
13.18.2 Format
13–44
Result:
SERVER = OFF
>>>
The TRIGGER parameter displays the current trigger setting.
To execute the SHOW TRIGGER command, enter the following:
>>> SHOW TRIGGER
Return
One of the following trigger settings appears on the screen:
Trigger
Setting
Description
ON
Enables trigger. Allows you to access the console
or boot the system from a remote system.
OFF
Disables trigger.
This example shows the trigger enabled.
>>> SHOW TRIGGER
Return
Result:
TRIGGER = ON
>>>
The START command sets the program counter (PC) and starts
the CPU. The command causes the system to exit console mode
and enter program mode.
To execute the START command, enter the following:
>>> START {address}
The TEST command executes selected diagnostic tests.
To execute the TEST command, enter the following:
>>> T[EST] {qualifier}
Return
Return