Character Control Commands; Esc ! N - Tally Dascom DT-210 Programmer's Manual

Tally Dascom DT-210/230

5 Character Control Commands

ESC ! n

[Function] Select print mode(s)
[Format] ASCII
Hex
Decimal
[Range] 0 ≤ n ≤ 255
[Default] n = 0
[Description] Select the character font and styles (emphasized, double-height, double-width, and
underlined) together.
(n)Bit
1,2
ESC % n
[Function] Select/cancel user-defined character set
[Format] ASCII
Hex
Decimal
[Range] 0 ≤ n ≤255
[Default] n = 0
[Description] • Select or cancel the user-defined character set.
• When the LSB of n is 0, the user-defined character set is canceled.
• When the LSB of n is 1, the user-defined character set is selected.
ESC ! n
1B 21 n
27 33 n
Off/On HEX
0 Off 00
On 01
Off 00
3 Off 00
On 08
4 Off 00
On 10
5 Off 00
On 20
6 Off 00
7 Off 00
On 80
ESC % n
1B 25 n
27 37 n
Programming Guide V1.1
Decimal
0 Character font A (12 × 24) selected.
1 Character font B (9 × 17) selected.
0 Reserved.
0 Emphasized mode is turned off.
8 Emphasized mode is turned on.
0 Double-height canceled.
16 Double-height selected.
0 Double-width canceled.
32 Double-width selected.
0 Reserved.
0 Underline mode is turned off.
128 Underline mode is turned on.
Function
- 26 -