Gs P X Y - Tally Dascom DT-210 Programmer's Manual

Tally Dascom DT-210/230
Type ID
Bit
0
1
2,3
4
5
6
7
• The information B that can be specified is as follows:
n
65
66
67
68
69
[Note]
When this command is transmitted, do not transmit the subsequent data until the
status is received.

GS P x y

[Function] Set horizontal and vertical motion units
[Format] ASCII
Hex
Decimal
[Range] 0 ≤ x ≤ 255
0 ≤ y ≤ 255
[Default] x = 180, y = 360
[Description]
• Sets the horizontal and vertical motion units to approximately 25.4/x mm {1/x"} and
approximately 25.4/y mm {1/y"}, respectively.
• When x = 0, the default value of the horizontal motion unit is used.
• When y = 0, the default value of the vertical motion unit is used.
Off／On HEX Decimal
Off 00
On 01
On 02
＿＿ ＿＿ ＿＿
Off 00
＿＿ ＿＿ ＿＿
＿＿ ＿＿ ＿＿
Off 00
Type of printer information
Firmware version
Manufacturer
Printer name
Product ID
Type of mounted additional
fonts
GS P x y
1D 50 x y
29 80 x y
Programming Guide V1.1
0 Multi-byte code characters not supported.
1 Multi-byte code characters supported
2 Auto cutter Installed. (Fixed)
Not used.
0 Fixed.
Reserved.
Not used.
0 Fixed.
Content
Depends on firmware version.
Tally DASCOM
DT-230
Serial number.
Japanese model: "KANJI JAPANESE"
Simplified Chinese model: "CHINA GB18030"
traditional Chinese model: "TAIWAN BIG-5"
Content
- 19 -