Esc; Esc = N; Esc S; Esc L - Tally Dascom DT-210 Programmer's Manual

Tally Dascom DT-210/230
Example: Graphic data might include this command.
• Do not transmit the subsequent data until the status is received after transmitting this
command.

ESC @

[Function] Initialize printer
[Format] ASCII
Hex
Decimal
[Description] • Clears the data in the print buffer and resets the printer modes to the modes that
were in effect when the power was turned on.
Keeps the following data:
• Macro definition data.
• Contents stored in the NV user memory.
• Contents defined for the NV graphics (NV bit image).
• Maintenance counter value.
• Setting value specified with GS ( E.

ESC = n

[Function] Select peripheral device
[Format] ASCII
Hex
Decimal
[Range] 0≤ n ≤3
[Default]
n = 1
[Description]
• Selects the device to which the host computer transmits data.
n
1,3
２
• When the printer is disabled (n = 2), all data except this command and the real-time
commands are ignored.

ESC S

[Function] Select standard mode
[Format] ASCII
Hex
Decimal
[Description]
Switches from page mode to standard mode

ESC L

[Function] Select page mode
ESC @
1B 40
27 64
ESC = n
1B 3D n
27 61 n
Function
Enables printer.
Disables printer.
ESC S
1B 53
27 83
Programming Guide V1.1
- 17 -